Posts tagged | HSLA |
80T5-B6

Low alloy FCAW wire for 5Cr-0.5Mo steels.

Read More
90T1-B9

High strength, low alloy FCAW wire for 9Cr-1Mo steels.

Read More
91T1-B9

High strength, low alloy FCAW wire for all-position welding of 9Cr-1Mo steels.

Read More
120MCS

High strength and low-temp toughness SAW wire for high strength steels requiring stress relief.

Read More
120T5-G

High strength and low-temp toughness FCAW wire ASTM A-148, A-352, A-487, and similar.

Read More
8522N

SAW wire for welding quenched and tempered steels that will undergo PWHT.

Read More
10018-SR+

High strength, low alloy electrode designed to meet NACE MR0175 requirements of <1% Ni and max 22 HRc with stress-relief up to twelve hours.

Read More
14018

Ultra high strength, low alloy covered electrode for joining and repair of ASTM A148, A643, A787, and similar variations.

Read More
15018

Ultra high strength, low alloy electrode for use in joining and repair of ASTM A145, A643, HY130, LQ130 and similar variations where mechanical properties are comparable.

Read More
SG-1

All position, flux-cored welding wire for use in joining AISI 4130 and similar steels.

Read More
YS75-S

A high strength, low alloy SAW wire recommended for joining AISI 4130, 8630, and variations thereof. This wire was specifically designed for welding Q&T steels that will undergo PWHT. Combined with appropriate flux will yield 100ksi UTS, 100 avg ft-lb at -20F, while still adhering to NACE MR0175

Read More
YS80-MC

A metal-cored GMAW electrode designed to join and repair AISI 4130 steel and similar steels without re-quench and temper, using only a stress-relief.

Read More
YS80-T

A metal-cored GTAW electrode designed to join and repair AISI 4130 steel and similar steels without re-quench and temper, using only a stress-relief.

Read More
YS130-FC

Ultra high strength, low alloy FCAW wire for use in joining and repair for ASTM A148, A757, HY130, LQ130, and similar steels.

Read More
YS130-MC

Ultra high strength, low alloy composite GMAW wire recommended for the joining and repair of HSLA steels with similar recorded strength levels.

Read More
YS130-S

Ultra high strength, low alloy composite wire recommended for the joining and repair of HSLA steels with similar recorded strength levels.

Read More
YS140

Ultra high strength, low alloy flux-cored wire for joining and repair of HSLA steels with similar recorded strength levels. Product provides high tensile and yield, with average impact strength greater than 20 ft-lbs at -40F.

Read More
YS145T

Metal-cored cut length wire for manual TIG welding. HSLA for join and repair of AISI 4340 and similar forgings without re-quench and temper.

Read More